1-5/8" Galvanized Steel Tension Band Used As Chain Link Fence Fitting
This kind of 1-5/8” Tension Band connects to a tension bar to tighten the chain link fabric of your fence.
- Material is Galvanized;
- Advantage is rust resistant
- Nuts and bolts not included
- Application for 1-5/8” diameter posts
- Can be used for gate frames
Chain Link Fence tension bands Characteristics
- Strong, Galvanized Pressed Steel Construction
- Beveled Design is Stronger Than Flat Bands
- Use to Attach Chain Link Fabric to Your Terminal Posts
- Variety of Sizes for All Fencing Needs
- Galvanized for Rust Prevention
Where is it installed tension bands?
1-5/8” tension band is installed by sliding over the 1-5/8” terminal post once the post is set.
Tension bands will be evenly placed on each terminal post.
How many do you need tension bands?
You will need 1-5/8” tension bands for every stretch of fence.
The amount of tension bands you will need per terminal post is 1 less than the height of the fence.
For example, if you have a 4’ fence you will need (3ea) 1-5/8” Tension Bands per terminal post. There are two exceptions, if you have a 3’ or 3-1/2’ fence, you will need (3ea) 1-5/8” tension bands. For a full stretch of fence from terminal post to terminal post, you will need double the amount. Ex: For a stretch 4’ fence you will need (6ea) total 1-5/8” tension bands.
Tension Band Installation
Place the tension band around your post (or gate / panel frame). Stretch your fabric until the tension bar fits inside the arms of the tension band and you can insert the 5/16" x 1-1/4" carriage bolt. Tighten the nut to secure.
| MOQ | 1pcs |
| Sample | Free-you only need to pay the freight charge |
| Finish | Hot dip galvanized or PVC coated |
| Chain link fence | If you need the chain link fence,we have too. |
Product Tags:
|
|
Durable Chain Link Fence Fittings Galvanized Steel Tension Band 1-5/8" Images
|
